HDA Undercut Anchor
HSL-3 Heavy Duty Expansion Anchor
-Medium Duty Anchors
KWIK HUS-EZ Screw Anchors
KWIK-HUS Screw Anchor
KB-TZ Kwik Bolt TZ Expansion Anchor
KB3, KWIK Bolt 3 Expansion Anchor
HCA Reusable Coil Anchor
HLC Sleeve Anchor
HDI Drop-in Anchor
HDI-L Flush Drop-in Anchor
HDI-P Short Drop-in Anchor
HDI-S Speed Thread Drop-in Anchor
HDI Setting Tools
-Light Duty Anchors
Light Duty Anchor Selection Chart
Kwik-Con II Concrete and Masonry Fastening System
HMH Metal HIT Anchor
HPS-1 Impact Anchor
HTB TOGGLER® Bolt
Kwik Tog Drywall Anchor
HSP/HFP Self-Drilling Drywall Anchor
IDP Insulation Anchor
HUD-1/HUD-L Universal Plastic Anchor
-Cast-In Anchors
HCI-WF Cast-In Anchor for Wooden Form
HCI-MD Cast–In Anchor for Metal Deck
HDA Undercut Anchor
The Hilti HDA Self Undercutting anchor provides a fast and easy way to have an undercut anchor. Excellent performance in tension zones (cracked concrete).
- Fast and easy self-undercutting setting operation. No use of extra undercutting tools needed
- Ductile high strength anchor for safety relevant, heavy duty fastenings with excellent
performance in cracked concrete (e.g. tension zones, earthquake-resistant structures) - Undercut segments provide cast-in-place performance and keying load transfer with
limited expansion forces for reduced edge distances and anchor spacings - Through-set style (HDA-T) provides exceptional high shear loading capacity
- Fully removable
| Base material | Cracked and uncracked concrete |
| Bolt/Rod material | Carbon steel zinc plated Carbon steel sheradized* 316 stainless steel |
| Thread diameter range | M10 to M20 |
Listings/Approvals
- ICC-ES (International Code Council) – ESR-1546
- Qualified under an NQA-1 nuclear quality program
- IBC 2009 – pending
HSL-3 Heavy Duty Expansion Anchor
The Hilti HSL-3 Heavy Duty Expansion Anchor is ideal for securing base plates to cracked and uncracked concrete, and hard natural stone.
With a wide range of sizes and head configurations, the HSL-3 comes in bolt, torque cap, and stud anchor versions, manufactured from 8.8 Carbon Steel 8.8 and 316 Stainless Steel, in thread diameters from M8 to M24.
When safety is vital, contractors rely on the HSL-3 mechanical expansion anchor from Hilti.
- For use in dynamic applications and the tension zone/cracked concrete
- Optimized design provides reliable performance in a wide range of applications
- Special design of anchor will clamp the base plate to the concrete
- Wide range of sizes and head configurations for multiple applications to fit your application requirements
| Base material | Cracked and uncracked concrete |
| Bolt/Rod material | Carbon steel 8.8, Stainless Steel 316 |
| Thread diameter range | M8 to M24 |
Listings/Approvals
- ICC-ES (International Code Council) – ESR-1545
- Qualified under an NQA-1 nuclear quality program
KWIK HUS-EZ Screw Anchors
The Hilti KWIK HUS-EZ screw anchors provide a screw anchor solution for every zone; cracked concrete, uncracked concrete, concrete over metal deck, as well as grout filled CMU blocks in both seismic and non seismic applications.
- Especially suited for seismic and cracked concrete applications (Every Zone)
- Seismic qualification tested in accordance with ICC-ES AC 193
- Quick and easy to install, with no high-accuracy torque wrench required
- Optimized thread design for best-in-class setting performance and superior load values
- For use with standard ANSI-tolerance drill bit; no special tolerance drill bits are required
- Fully-removable anchoring solution
- Suitable for reduced edge distances and spacing
- Attractive head with integrated washer and clear indication of length and size
- Ideal high productivity solution for all your medium duty applications that require an ICC approval for concrete and seismic areas
| Base material | cracked and noncracked concrete light weight concrete light weight concrete over metal deck Grout filled CMU blocks |
| Anchor material | carbon steel, electroplated zinc min8 microns |
Listings/Approvals
- ICC-ES (intenational Code Council): ESR- 3027 (AC193 cracked and uncracked concrete)
ESR report for grout filled CMU blocks – Pending (AC 106 Masonry) - FM pending
- Qualified under an NQA-1 nuclear quality program
- COLA pending
- Miami Dade pending
KWIK-HUS Screw Anchor
The Hilti KWIK HUS screw anchor provides a screw anchor solution for the every day application and temporary fastenings
- Quick and easy to install, with no high-accuracy torque wrench required
- Optimized thread design for best-in-class setting performance and superior load values
- For use with standard ANSI-tolerance drill bit; no special tolerance drill bits are required
- Fully-removable anchoring solution
- Suitable for reduced edge distances and spacing
- Attractive head with integrated washer and clear indication of length and size
- Ideal high productivity solution for all your medium duty applications and temporary fastenings
| Base material | non-cracked concrete Grout filled CMU blocks light weight concrete over metal deck |
| Anchor material | carbon steel, electroplated zinc min 8 microns |
Listings/Approvals
- ICC-ES report for grout-filled CMU blocks -pending
Tested acc. AC 193 for uncracked concrete - FM pending
- Qualified under an NQA-1 nuclear quality program
KB-TZ Kwik Bolt TZ Expansion Anchor
The Hilti KB-TZ expansion anchor is designed for seismic and cracked concrete and comes pre assembled for a quick installation.
- Especially suited for seismic and cracked concrete (Tension Zone) applications
- Seismic qualification tested in accordance with ACI 355.2 and ICC-ES AC 193
- Small minimum edge distance and spacing for maximum design flexibility
- Nuts and washers pre-assembled
- Rounded end for easy installation
- Meets ductility requirements of ACI 318 D.3.3
- Product and length identification mark facilitates quality control and inspection
- Periodic special inspections
| Base material | Lightweight Concrete Cracked and non-cracked concrete Light to medium weight concrete over metal deck |
| Anchor material | Carbon steel, electroplated zinc min 5 microns Stainless Steel AISI 304 Stainless Steel AISI 316 |
Listings/Approvals
- ICC-ES (International Code Council) – ESR-1917
- COLA (City of Los Angeles) – RR-25701
- FM (Factory Mutual)
- UL (Underwriter Laboratories)
- Qualified under an NQA-1 nuclear quality program
KB3, KWIK Bolt 3 Expansion Anchor
The Hilti KB3 Kwik Bolt 3 expansion anchor provides an anchor for the every day application.
- Approved by ICC-ES for masonry and concrete
- Rounded end for easy installation
- Dog point impact section to prevent thread damage during installation
- Available in carbon steel, hot-dip galvanized, 304SS and 316SS to suit any environment
- Best approval rating in class
| Base material | Lightweight Concrete Uncracked concrete Lightweight concrete over metal deck Grout-filled block |
| Anchor material | KB3: carbon steel, electroplated zinc min 5 microns KB3 HDG: carbon steel, hot-dip galvanized min 43 microns KB3 304SS: AISI 304 stainless steel KB3 316SS: AISI 316 stainless steel |
Listings/Approvals
- ICC-ES (International Code Council) – ESR-1385 (ACO1 Masonry) ERS-2302 – (AC 193 concrete)
- FM (Factory Mutual) – Sprinkler Hanger Components for Automatic Sprinkler Systems
- UL (Underwriter Laboratories) – UL 203 Pipe Hanger Equipment for Fire Protection Services
- COLA (City of Los Angeles) – RR-25577
- Metro-Dade County – NOA No. 06-0810.13
- Qualified under an NQA-1 nuclear quality program
HCA Reusable Coil Anchor
The HCA reusable coil anchor is designed for concrete applications and comes pre assembled to keep production moving.
- Hex head bolt style enables low profile fastenings to be made (separate washer included)
- Significant cost savings as result of multiple-use design
- Stud type coil anchors make through-type fastenings a snap
- Coil anchors are preassembled units to keep production fastenings moving quickly
| Base material | Concrete |
| Anchor material | Carbon steel, case hardened, zinc plated |
HLC Sleeve Anchor
The HLC Sleeve anchor is a stud type anchor that can be installed in a bottomless hold, such as block and brick, but is also suitable for concrete.
- Stud-type anchor design allows easy through-type fastenings and can be set in bottomless hole
- Anchor size is same as drill bit size for easy installation
- Variety of head styles, lengths and sizes allow for versatile applications
- High performance in block, masonry and concrete base materials
| Base material | Uncracked concrete Grout-filled block Solid and brick |
| Anchor material | HLC-H, -HX, -FPH, -AC, -RC: Carbon steel, zinc plated min 5 micron HLC-HX SS304: AISI 304 stainless steel |
Listings/Approvals
- UL (Underwriters Laboratories) – No. 203 (1/2″, 5/8″, 3/4″)
HDI Drop-in Anchor
The HDI drop in anchor is designed for non cracked, lightweight and lightweight over metal deck concrete. It allow for shallow embedment depths yet high performance.
- Anchor, setting tool and Hilti drill bit form a matched tolerance system to provide reliable fastenings
- Below surface setting for easy patchwork
- Allows for shallow embedment without sacrificing performance
| Base material | Non-cracked concrete Lightweight concrete Lightweight concrete over metal deckk |
| Anchor material | HDI Carbon Steel material meets the requirements of AISI 1110M or AISI 1010 for the 1/4″, 3/8″ and 1/2″ HDI’s and AISI 12L14 for the 5/8″ and 3/4″ HDI’s Carbon Steel HDI plated with a zinc finish for corrosion protection in accordance with ASTM B633, SC 1, Type III HDI Stainless Steel material meets the requirements of AISI 303 |
Listings/Approvals
- UL (Underwriter Laboratories) – No. 767G
- FM (Factory Mutual) – Serial No. 22765
- Meets the description in Federal Specification – FF-S-325, Group VIII, Type 1
HDI-L Flush Drop-in Anchor
he HDI-L flush drop in anchor is designed for an accurate flush mount, consistent anchor depth and easy rod alighment/installation.
- Lip provides flush installation, consistent anchor depth, and easy rod alignment
- Intelligent expansion section adapts to the base material and reduces number of hammer blows up to 50%
- Lip allows accurate flush surface setting, independent of hole depth and ideal for repetitive fastenings with threaded rods of equal length
| Base material | Non-cracked concrete Lightweight concrete |
| Anchor material | Carbon Steel HDI plated with a zinc finish for corrosion protection in accordance with ASTM B633, SC 1, Type III |
Listings/Approvals
- Meets the description in Federal Specification – FF-S-325, Group VIII, Type 1
HDI-P Short Drop-in Anchor
The HDI-P short drop in anchor is designed for hollow core concrete installations.
- Optimized 3/4″ anchor length to allow reliable fastening in hollow core panels, precast plank and post tension slabs
- Shallow drilling enables fast installation
- Lip provides flush installation, consistent anchor depth, and easy rod alignment
- Setting tool leaves mark on flange when anchor is set properly to aide inspection and provide reliable installation
| Base material | Concrete |
| Anchor material | Anchor material is AISI 1010 or AISI 1110M Carbon steel anchor plating is dull zinc, in accordance with ASTM B633, SC 1, Type III |
HDI-S Speed Thread Drop-in Anchor
The HDI-S threaded drop in anchor is designed to accept coil rods in forming applications.
- Designed to accept coil rods
- Setting with the standard HDI setting tool
- Forms a matched tolerance system for your forming applications
| Base material | Concrete Solid block |
| Anchor material | Carbon steel zinc plated |
HDI Setting Tools
The HDI setting tools are the primary tools to use with the HDI-S drop in anchor.
Light Duty Anchor Selection Chart
Provides a quick reference for the ideal anchoring solution for light weight applications
Kwik-Con II Concrete and Masonry Fastening System
The Hilti Kwik-Con II concrete and masonry fastening system is ideal for anchoring into concrete, grout filled block, hollow concrete block and solid brick, several head styles to choose from, torx, phillips and flat, zinc plated and stainless steel available
Features & Applications
- Choice of head styles: Torx Hex Washer Head for fast, secure driving; Torx or Phillips Flat Head for countersinking applications
- Matched tolerance carbide-tipped drill bits for highest performance
- Exclusive internal torx drive
- Zinc plated to minimum 8 microns
- Stainless steel fasteners available in select sizes
| Base material | Concrete Grout filled block Hollow concrete block Solid brick |
| Anchor material | 1018 to 1022 cold rolled steel, case hardened, zinc/chromate plating min 8 microns or 410 stainless steel |
Listings/Approvals
- Miami-Dade County NOA-07-0924.03
HMH Metal HIT Anchor
The Hilti HMH Metal HIT Anchor is ideal for anchoring into concrete, solid and hollow brick and concrete block, consistant load values for light weight applications, fast and easy installation
- Quick and easy fastening for maximum speed and installation
- Low profile mushroom head style provides a nice finish and tamper proof fastening
- Anchor design allows easy through-type fastenings even in bottomless holes
- Consistent load values for light duty fastenings in concrete and masonry
- Choice of Stainless Steel or Carbon Steel nail allows for indoor or outdoor use
| Base material | Concrete Solid brick Hollow brick and concrete block |
| Anchor material | Body: Aluminum/zinc alloy Drive Pin: AISI 1018 carbon steel, zinc plated or 304 stainless steel |
HPS-1 Impact Anchor
The Hilti HPS-1 Impact Anchor is ideal for anchoring into concrete, solid and hollow brick and hollow concrete block, ideal for countersinking into soft woods and metal parts
- Anchor collar and screw head form a compact unit which allow countersinking in soft wood and solid clamping action with metal parts
- Expanding head opens in hollow base material to provide reliable keying effect
- Wide temperature range allows use in extreme climate conditions
- Suitable for through-hole fastenings to improve productivity
- Removability adds to HPS-1 versatility
| Base material | Concrete Solid brick Hollow brick and concrete block |
| Anchor material | High grade nylon material (PA 6.6 polyamide) Free of cadmium and lead Free of halogens and silicones Temperature resistant from -40° F to 176° F Anchor can be installed from 14° F to 104° F |
HTB TOGGLER® Bolt
The Hilti HTB Toggler Bolt is ideal for a anchoring into most drywall and hollow wall materials up to 2-1/4″ thick.
- Unique installation “legs” and locking cap facilitate fastenings in wide range of drywall and hollow wall materials up to 2-1/4″ thick
- Once piece zinc plated carbon steel channel provides greater holding power
- Anchor is adjustable for various base material thicknesses for easier installation as well as minimum inventory investment
- Remains mounted in the wall without screw for convenient handling, installation and re-use
| Base material | Wide range of hollow-wall materials |
| Anchor material | Metal channel: AISI 1040 steel, zinc plated Pulling straps/locking cap: plastic |
Kwik Tog Drywall Anchor
The Hilti Kwik Tog Drywall Anchor is ideal for anchoring into most drywall materials especially 1/4″ thin-walled and hollow base materials, leg brace provides added support, three convenient sizes
- Unique one-piece design for easy setting
- Three convenient sizes for use in a variety of hollow base materials from 1/4″ drywall to block and concrete
- Leg braces provide added support
- Ribs on body help prevent anchor from spinning during installation
- Remains mounted in the wall without screw for convenient handling, installation and reuse
| Base material | Virtually all existing building materials, especially for thin‑walled and hollow base materials like panels and similar applications |
| Anchor material | High grade nylon material (PA 6 polyamide) Free of cadmium and lead Free of halogens and silicones Resistant in temperatures from -40° F to 176° F |
HSP/HFP Self-Drilling Drywall Anchor
The Hilti HSP/HFP Self Drilling Drywall Anchor is ideal for anchoring into Gypsum board, easy installation self drilling no predrilled holes required
- “Shark’s tooth” design for correct positioning and quick installation
- Cuts its own thread
- One Hilti bit for anchor and screws.
No setting tool required - Hilti HSP also available with 1/4″ male connecting thread
| Base material | Gypsum board (drywall) |
| Anchor material | HSP: die cast zinc HFP: PA 6.6 polyamide, glass fiber reinforced |
IDP Insulation Anchor
The Hilti IDP Insulation Anchor is ideal for anchoring insulation board to concrete, lightweight concrete and solid brick
- Specially structured head to help ensure bonding of plaster applied directly over the anchor
- Suitable for insulation thickness up to 4-3/4″ for enhanced versatility
- Installation in concrete and masonry allow versatile use
- No metal parts which reduces potential condensation behind finished coat of EIF systems
| Base material | Concrete Lightweight concrete Solid brick |
| Anchor material | Polypropylene (not UV resistant) Free of heavy metals Free of halogens and silicones In-place temperature resistant from -40° F to 176° F Anchor can be installed from 32° F to 104° F |
HUD-1/HUD-L Universal Plastic Anchor
The Hilti HUD-1 / HUD-L Universal Plastic Anchor is ideal for anchoring into concrete, lightweight concrete, hollow and solid brick/block and drywall, flared collar and no collar available, high grade nylon material contains no halogen or heavy metals
- Precisely controlled screw guidance keeps the screw within the anchor shank
- Four-way expanding head
- HUD-1: Flared collar: makes the anchor suitable for pre or through installation fixtures
- HUD-L: No collar: suitable for installation through fixtures
- HUD-1 and HUD-L: 1/4″ and 5/16″ sizes form a keying knot when installed in hollow material
| Base material | Concrete Lightweight concrete Hollow block Hollow and solid brick Aerated concrete Drywall |
| Anchor material | High-grade nylon material (PA6 polyamide) Contains no halogen and no heavy metals Resistant in temperatures from -40° F to 176° F |
HCI-WF Cast-In Anchor for Wooden Form
The Hilti HCI-WF cast-in anchor’s primary use is for poured concrete after anchor placement over wood form with a minimum slab thickness of 4 inches, large plastic flange assures anchor is flush with form and protective plastic sleeve to keep concrete or fire stop from entering the threads
- Installation from above – No overhead drilling and anchor installation – No ladder or platforms needed
- Hexagon head prevents spinning in concrete
- Identification decal for flexible color application
- HCI-WF: Large plastic flange helps ensure anchor is flush with wood form to prevent concrete from entering threads
- HCI-WF: Easy break-off nails
| Base material | HCI-WF: Concrete poured, after anchor placement, over wood form with a minimum slab thickness of 4 inches |
| Anchor material | HCI-WF: Heat treated, zinc-plated carbon steel body with an engineeered plastic flange |
Listings/Approvals
- FM (Factory Mutual) Pipe hanger Components for Automatic Sprinkler
HCI-WF 3/8″ and 1/2″
UL (Underwriter Laboratories) HCI-WF 3/8″ to 3/4″”
HCI-MD Cast–In Anchor for Metal Deck
The Hilti HCI-MD cast-in anchor’s primary use is for poured concrete over metal deck with a minumum slab thickness of 4 inches, no overhead drilling, no ladder or work platform needed for installation
- Installation from above – No overhead drilling and anchor installation – No ladder or platforms needed
- Hexagon head prevents spinning in concrete
- Identification decal for flexible color application
- HCI-MD: Protective plastic sleeve to prevent concrete, firestop spray, or insulation spray from entering threads
- HCI-MD: Flange prepared for additional screws if required for pre‑concrete rod installation
- HCI-MD: Strong placement spring for reliable placement
| Base material | HCI-MD: Concrete poured, post anchor placement, over metal deck with a minimum slab thickness of 4 inches |
| Anchor material | HCI-MD: Heat treated, zinc-plated carbon steel body, flange and spring with an engineeered plastic protective sleeve |
Listings/Approvals
- FM (Factory Mutual) Pipe hanger Components for Automatic Sprinkler
HCI-MD 3/8″ to 3/4″
UL (Underwriter Laboratories) HCI-MD 3/8″ to 3/4″
